Quality control of high temperature release film  is a concern for all manufacturers, and it is a challenge, which is the competitiveness of a manufacturer. Today we have summarized the six key issues for quality control.

1. Don't easily clarify the process, and don't easily change the clarified process

To identify the root cause, main factors, or main manifestations of quality issues with high-temperature release films; Changing the process easily before clarifying the problem actually masks the true cause and problem.

2. Process control requires a strong concept of quantification and traceability

The quality of high-temperature release film depends on many factors, so do not overlook any details; Try to use data to control and remember any details; Failure to control and trace process details can mislead the formulation of corrective and preventive measures.

3. Solving problems requires patience

Don't be impulsive, expect to eat a fat person in one breath; Do not ignore abnormal situations because they are not related to the problem being solved; Don't take action when you can't find the reason and law. You can control the factors that affect the study of high-temperature release films; Review and review some of the experiences and laws previously tested and summarized;

Once some experiences and laws are discovered, it is worthwhile to delve deeper and elevate them into theory, even if it costs a little more;

You should know that the "Thousand Mile Embankment was destroyed in the Ant Nest" and also know that "Foolish Lord moved the mountain".

4. To establish a preventive approach

The high-level of quality management is prevention, not how to remedy problems after they occur; Before any quality problem occurs, there should be signs, depending on whether you have the means, methods, and experience to monitor and identify it; When the same quality problem recurs for the second time, it should be highly valued; The process and effect data of each day should be organized using tools, and laws and changing trends should be found from the organized results. These laws and displayed trends require continuous correction; Prior to this, all control elements should be as consistent as possible.

5. Quality control should have a management approach

Do not expect to rely directly on personnel to achieve stable quality of high-temperature release films; Quality is produced, and without direct management of the manufacturer, quality can never be stable; So it is necessary to observe, value, and study the manifestations and states of direct manufacturers, and manage and mobilize these manifestations and states; As long as the direct manufacturer's manifestation and status are not controlled, once there is a quality problem, you will always study the incorrect reasons; Don't think that if all the process control requirements in our current process are suitable, the quality will be fine; So our process control requires continuous improvement, while also managing people well.

6. Listen to more opinions and suggestions

Do not think that others do not understand reality and cannot solve problems at once, as opinions have no value; But they, especially direct manufacturers, can give us many prompts and reminders; As long as you can solve this problem, anyone's opinions and suggestions can be ignored; But when it cannot be dealt with, anyone's opinions and suggestions should be listened to, tried and tested, regardless of whether you agree or disagree; The thinking of quality management often involves the forefront of science, even a casual sentence or complaint may guide or imply a major direction of technological innovation. Therefore, professional technical personnel should pay attention to details and be good at capturing them.